Products
Shop By
Shopping Options
eInfochips EIC-LCD-1080P, is a 5.5” touch screen LCD display that can be used with both eInfochips 410 and eInfochips 820 development kits. This LCD supports 1080 x1920 (FHD) resolution, and operates at 5V voltage supply. It integrates with eInfochips 410/eInfochips 820 over MIPI DSI interface (4 lane) and uses I2C for touch interface configuration.
- Interface Type: MIPI DSI
- LCD Type: IPS TFT-LCD
- Backlight Type: White LED(14*LED)
- Display Resolution: 1080 x 1920 (Maximum)
- Framerate supported: 60
- Bit Per Pixel (BPP): 24
- Pixel stream type: Packed pixel stream, RGB888 (24 bits per pixels)
- Carrier to LCD Cable: 40 - pins FFC Cable
- LCD-Active area – Outline dimensions (W x H): 68.04mm(W) x 120.96mm(H)
- Pixel pitch - 0.063mm x 0.063mm
- Panel Type : Video Mode
- Source output voltage level GVDDP-GND: 2.85 ~ 6V, GVDDN-GND: -2.85 ~ -6V
- System Interfaces
- MIPI DSI 4 data lane
- I2C (8-bits)
- Display Modes
- Power saving mode (standby / deep standby)
- Operating Temperature: 70° C ± 2° C; -20° C ± 2° C
- Ambient Temperature: 80° C ± 2° C; -30° C ± 2° C
- Built–in OTP (4 Times) to store VCOM/GVDD calibration and ID1~ID3
- Built–in OTP (1 Times) to store gamma, panel timing, and analog power setting
- Built-in internal oscillator and hardware reset
Price :
$149.00
eInfochips offers a complete camera system consisting of an interface board with camera module. This system can be connected to an existing eInfochips 410 development kit for quick prototyping. The system consists of a camera module solution based on SONY IMX135 Image Sensor Chip. It is a highly integrated 13MP camera chip that includes a CMOS image sensor, image correction functionality and serial transmission using 4-lane/2-lane MIPI.
ExplorePrice :
$49.00
eInfochips offers a complete camera system consisting of an interface board with camera module. This system can be connected to the existing eInfochips 410 development kit for quick prototyping of multimedia solutions.The system consists of a 5-megapixel camera module solution on a single chip (OV5640), with autofocus (AF) solution. It interfaces with the board over MIPI Interface.
Technical Features
- Interface Type: 1xCSI(2-LANES)
- Sensor: OV5640 (5MP sensor)
- Sensor Output: YUV
- Supply Voltage 3.7V Supply
- Board Dimension(WXH) in mm 35 mm X 35 mm
- Features: OmniVision's 1.4 micron OmniBSI™ backside illumination architecture to deliver excellent pixel performance and best-in-class low-light sensitivity
Price :
$49.00
eInfochips EIC-Q660-500 is a Single Board Computer (SBC) based on Qualcomm Snapdragon 660 System on Chip (SoC). Qualcomm Snapdragon 660 SoC supports a leap in performance, engineered to allow enhanced user experiences at efficient low power consumption. Qualcomm® Adreno™ 512 GPU enables up to 30% better graphics making this SBC ideal for Digital Signage, Medical Imaging and high-end video applications.
ExplorePrice :
$420.00
With the recent advancements in embedded applications, the devices are expected to be smaller, multi-functional with high-end video and multiple connectivity options. eInfochips 624 Micro SOM is a high performance module based on Qualcomm® Snapdragon™624 System on Chip (SoC). Qualcomm Snapdragon 624 is a mid-range octa-core SoC and supports 802.11ac WiFi and Bluetooth 4.1. The 624 is highly efficient than its predecessor and supports 1080p90 encoding.
GET A QUOTE Download Datasheet
ExplorePrice :
$400.00
The Snapdragon 845 Mobile Platform includes high performance camera and graphics features that are designed to capture advance color information. Adreno 630 Visual Processing Subsystem and Qualcomm Spectra™ 280 ISP has enabled vivid graphics, crystal-clear audio and improved area awareness, making Snapdragon 845 Mobile Platform ideal for real-life experience solution. To support the ecosystem of technology companies and application providers looking to utilize these advanced features, eInfochips is offering a Hardware Development Kit (HDK) featuring the Qualcomm® Snapdragon™ SDA845 processor. This development kit is designed to help OEMs and device makers in evaluating the processor and peripherals; an ideal starting point for creating high-performance mobile devices, software development and applications.
Note:
- The LCD display is an add-on accessory and not part of the standard kit
Price :
$1,079.00
eInfochips offers a complete camera system consisting of an interface board with camera module. This system can be connected to the existing eInfochips 820 development kit for quick prototyping of multimedia solutions. The system consists of a camera module solution on a single chip (OV5640), with autofocus (AF) solution. It supports 5 MP still image capture along with 720p@60 FPS and 1080p@30 FPS video streaming capability. It interfaces with the board over the MIPI Interface.
ExplorePrice :
$49.00
eInfochips also offers a camera module that is compatible with the eInfochips 845 hardware development kit. There are three camera sensors mounted on EIC_Q845_CAM with flash LEDs including IMX318 (22.5 Mega-Pixel) and IMX258 (13 Mega-Pixel) sensor.
ExplorePrice :
$351.00
eInfochips also offers a LCD that is compatible with the eInfochips 845 hardware development kit. It is a 5.7 inch QHD LCD Touch panel that interfaces with the kit via 4 lane MPI DSI Interface. It supports 1440x2560 display resolution.
ExplorePrice :
$168.00
With the recent advancements in embedded applications, the devices are expected to be smaller, multi-functional with high-end video and multiple connectivity options. eInfochips 624 kit is a combination of Qualcomm® Snapdragon™624 based Micro SOM and a carrier board. The kit come with a pre-built Android BSP that can help in early prototyping `and parallel software development. Qualcomm Snapdragon 624 is a mid-range octa-core SoC and supports 802.11ac WiFi and Bluetooth 4.1. The 624 is highly efficient than its predecessor and supports 1080p90 encoding.
ExplorePrice :
$745.00
This website requires cookies to provide all of its features. By using our website, you agree to our use of cookies - Read More - Accept Terms