Accessories
Shop By
Shopping Options
eInfochips offers the HDMI input to Dual CSI daughter board. This helps in quick prototyping and is tested with EIC-QCS8250-210 and EIC-QRB5165-210 development kits.
ExplorePrice :
$130.00
eInfochips offers the Dual DSI to HDMI-Out daughter board. This helps in quick prototyping and is tested with EIC-QCS8250-210 and EIC-QRB5165-210 development kits.
ExplorePrice :
$130.00
eInfochips offers the camera daughter board which allows you to connect different off-the-shelf third-party camera modules with EIC-QCS8250-210, EIC-QRB5165-210, EIC-QCS610-215/210, and EIC-QCS410-215/210 development kits for quick prototyping.
*Price is Excluding Camera Sensor Module
ExplorePrice :
$108.00
eInfochips also offers a LCD that is compatible with the eInfochips 845 hardware development kit. It is a 5.7 inch QHD LCD Touch panel that interfaces with the kit via 4 lane MPI DSI Interface. It supports 1440x2560 display resolution.
ExplorePrice :
$168.00
eInfochips also offers a camera module that is compatible with the eInfochips 845 hardware development kit. There are three camera sensors mounted on EIC_Q845_CAM with flash LEDs including IMX318 (22.5 Mega-Pixel) and IMX258 (13 Mega-Pixel) sensor.
ExplorePrice :
$351.00
eInfochips offers a complete camera system consisting of an interface board with camera module. This system can be connected to the existing eInfochips 820 development kit for quick prototyping of multimedia solutions. The system consists of a camera module solution on a single chip (OV5640), with autofocus (AF) solution. It supports 5 MP still image capture along with 720p@60 FPS and 1080p@30 FPS video streaming capability. It interfaces with the board over the MIPI Interface.
ExplorePrice :
$49.00
eInfochips offers a complete camera system consisting of an interface board with camera module. This system can be connected to the existing eInfochips 410 development kit for quick prototyping of multimedia solutions.The system consists of a 5-megapixel camera module solution on a single chip (OV5640), with autofocus (AF) solution. It interfaces with the board over MIPI Interface.
Technical Features
- Interface Type: 1xCSI(2-LANES)
- Sensor: OV5640 (5MP sensor)
- Sensor Output: YUV
- Supply Voltage 3.7V Supply
- Board Dimension(WXH) in mm 35 mm X 35 mm
- Features: OmniVision's 1.4 micron OmniBSI™ backside illumination architecture to deliver excellent pixel performance and best-in-class low-light sensitivity
Price :
$49.00
eInfochips offers a complete camera system consisting of an interface board with camera module. This system can be connected to an existing eInfochips 410 development kit for quick prototyping. The system consists of a camera module solution based on SONY IMX135 Image Sensor Chip. It is a highly integrated 13MP camera chip that includes a CMOS image sensor, image correction functionality and serial transmission using 4-lane/2-lane MIPI.
ExplorePrice :
$49.00
eInfochips EIC-LCD-1080P, is a 5.5” touch screen LCD display that can be used with both eInfochips 410 and eInfochips 820 development kits. This LCD supports 1080 x1920 (FHD) resolution, and operates at 5V voltage supply. It integrates with eInfochips 410/eInfochips 820 over MIPI DSI interface (4 lane) and uses I2C for touch interface configuration.
- Interface Type: MIPI DSI
- LCD Type: IPS TFT-LCD
- Backlight Type: White LED(14*LED)
- Display Resolution: 1080 x 1920 (Maximum)
- Framerate supported: 60
- Bit Per Pixel (BPP): 24
- Pixel stream type: Packed pixel stream, RGB888 (24 bits per pixels)
- Carrier to LCD Cable: 40 - pins FFC Cable
- LCD-Active area – Outline dimensions (W x H): 68.04mm(W) x 120.96mm(H)
- Pixel pitch - 0.063mm x 0.063mm
- Panel Type : Video Mode
- Source output voltage level GVDDP-GND: 2.85 ~ 6V, GVDDN-GND: -2.85 ~ -6V
- System Interfaces
- MIPI DSI 4 data lane
- I2C (8-bits)
- Display Modes
- Power saving mode (standby / deep standby)
- Operating Temperature: 70° C ± 2° C; -20° C ± 2° C
- Ambient Temperature: 80° C ± 2° C; -30° C ± 2° C
- Built–in OTP (4 Times) to store VCOM/GVDD calibration and ID1~ID3
- Built–in OTP (1 Times) to store gamma, panel timing, and analog power setting
- Built-in internal oscillator and hardware reset
Price :
$149.00
This website requires cookies to provide all of its features. By using our website, you agree to our use of cookies - Read More - Accept Terms