eInfochips 410: EIC-Q410-200
eInfochips 410 SoM is a high performance System-on-Module based on Snapdragon 410, that consists of 64 bit quad-core ARM® Cortex® A53 to offer advanced processing capabilities at low power. eInfochips 410 SoM is a cost effective, ultra-small form factor (35mm x 26mm) module low power consumption, connectivity, multimedia functionality, along with solid processing power. The SoM offers on-chip eMCP memory (1GB LPDDR3 + 8GB eMMC) . eInfochips 410 product line provides benefit of Price, Performance, Package and Power making it an ideal solutions for robotics, infotainment, automation and control - and Internet of things (IoT) devices, including wearable technology.
*Out of stock. M.O.Q. 500 units. The standard lead-time is 36 weeks.
$75.00
| CPU | |
|---|---|
| CPU Name | Qualcomm Snapdragon™ 410 (APQ8016) |
| CPU Type | 64-bit quad ARM® Cortex®-A53 CPUs |
| CPU Cores | 4 |
| CPU Clock (Max) | 1.2 GHz |
| MEMORY | |
|---|---|
| eMMC | 1GB LPDDR3 RAM @533MHz + 8GB eMMC (eMCP package) |
| MULTIMEDIA | |
|---|---|
| 2D/3D Graphics Acceleration | Adreno 306 GPU |
| Video Encode | 720p @ 30 fps (H.264 Baseline/MPEG-4) 30 fps @ 1080p (MPEG-4/H.264/VP8/H.263) WFD 720p @ 30 fps |
| Video Decode | 30 fps @ 1080p(MPEG4/ H.264/H.263/DivX/MPEG2/VC1/Soreson/VP8) WFD 1080p @ 30 fps |
| Audio | Low power audio for mp3 and AAC playback, surround sound with dedicated Encoders for audio and FM. Dolby Digital Plus and DTS-HD surround sound. |
| Camera Interfaces | 2 x MIPI-CSI for Camera Support 1 x 4-lane CSI(CSI0) (support upto 13 MP sensor) 1 x 2-lane CSI(CSI1) (supports upto 8 MP sensor) |
| DISPLAY | |
|---|---|
| HDMI | HDMI Monitor supports up to a resolution of 1080P/30Hz. (using Analog Devices ADV7533 based MIPI DSI To HDMI Bridge Board ) |
| DSI | 1 x MIPI DSI for Display support - 5 Inch LCD supportsresolution of 720RGB x 1280 |
| NETWORKING | |
|---|---|
| Wi-Fi | IEEE 802.11 b/g/n |
| Bluetooth | 4.0 |
| AUDIO | |
|---|---|
| Digital / Analog Interface | I2S for audio Interface - 1 Headset with mic - 2 Analog Mic - 1 Speaker - 1 Ear piece |
| CONNECTIVITY | |
|---|---|
| SD | 1x micro SD card |
| USB |
1x USB 3.1 (USB 3.1 & USB 2.0 capable) 2x USB 2.0 |
| UART | 2 |
| I2C | 4 |
| SPI | 2 |
| Storage | 1GB LPDDR3 533 MHz 8 GB eMMC 4.51 External micro SD Card |
| RTC | Supports in build RTC |
| PCI-Express | Not supports |
| Sensors | 1x Gyro + Accelerometer + magnetometer using MPU 9250 |
| GPS | Supports on board GPS |
| GPIO | 7 x Low Speed GPIOs |
| OS SUPPORT | |
|---|---|
| Linux | Yes (Linux Kernel 3.19 or higher from Linaro distribution) |
| Windows | Window 10 (In development) |
| MECHANICAL SPECIFICATIONS | |
|---|---|
| SoM Interface | 156 Pins Edge Castellations |
| Dimensions (W x L x H) | 35mm x 26mm x 2.1mm |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| Supply voltage | +12V Main Supply |
| Digital I/O voltage | 1.8 V |
eInfochips 410 System On Module Block Diagram
Documentation- eInfochips 410 Technical Datasheet Download - Hardware Reference Manual Download Secure Downloads on Technical Portal-Quick Start Guide -Chipset Overview -Android User Guide -Linux User Guide -Environment Setup Guide -User Manual -SOM HDMI BRIDGE BOARD 17 00278 02-410 -SOM LCD INTERFACE Board 16 00284 02-410 -Som Carrier 16 00275 02-410 -SoftwareReleaseNotes Android 1 0-410 -SoftwareReleaseNotes Linux_15 09 1 0-410 |
1. What are the accessories available?
Please refer Accessories tab.
2. Does the board support a cellular or GSM connection?
The eInfochips 410 does not include support for a wireless modem. Third party cellular modem dongles can be connected to this platform via USB ports and may require special drivers from the respective manufacturers.
3. What are the capabilities of the video Decoder/Encoder?
- Video Encode
- H.264 baseline / MPEG-4 (720p/30fps)
- MPEG4/H2.64/VP8/H2.63 (1080P/30fps)
- Video Decode
- H.264/H.263/DivX/MPEG2/VC1/Soreson/VP8(1080p/30fps)
- H.264/H.263/DivX/MPEG2/VC1/Soreson/VP8)
- WDF 1080p/30fps
4. How to use ADB along with some USB device?
ADB over Wi-Fi may be used if USB device and adb both are expected to work simultaneously.
5. How to switch display form LCD to HDMI and vice-versa?
eInfochips 410 Supports dual display, it Supports LCD/HDMI switching via "oem select-display-panel".
To switch from LCD to HDMI mode:
To switch from LCD to HDMI mode:
- 1 $ adb reboot bootloader
- 2 $ sudofastboot oem select-display-panel adv7533_1080p
- 3 $ sudofastboot reboot
- 1 $ adb reboot bootloader
- 2 $ sudofastboot oem select-display-panel ssd2080m_720p_video
- 3 $ sudofastboot reboot
6. USB device not working
Since micro USB device mode prevents host mode operation, adb (device mode) takes priority and work by default even if you have a USB mouse/keyboard connected. For a USB mouse/keyboard/Ethernet to work, the micro USB to PC needs to be disconnected.
7. Ethernet not working
For a USB mouse/keyboard/Ethernet to work, the micro USB to PC needs to be disconnected.
8. Ethernet hot-plug not working in Android
In order to provide Ethernet support, eInfochips 410 uses USB to Ethernet Converter. USB device mode takes priority over Host mode, even if you have a USB mouse/keyboard/Ethernet connected.
For a USB mouse/keyboard/Ethernet to work, the micro USB cable needs to be disconnected. Then need to run following commands:
$ su
$ netcfg eth0 up
$ netcfg eth0 dhcp
For a USB mouse/keyboard/Ethernet to work, the micro USB cable needs to be disconnected. Then need to run following commands:
$ su
$ netcfg eth0 up
$ netcfg eth0 dhcp
9. How to switch into Fastboot mode?
There are two ways to switch the device into fastboot mode
1. Power on the device while pressing reset switch SW4
2. If board is running with Android use below command:
$adb reboot bootloader
1. Power on the device while pressing reset switch SW4
2. If board is running with Android use below command:
$adb reboot bootloader
10. How to switch Audio to HDMI
Use app
11. Android screen turns off after few seconds
System may have gone to sleep mode. In order to turn on the screen please press switch SW3.
12. System gets rebooted after flashing LINUX
This issue may occur if the HDMI module is not connected with the board. So make sure you have HDMI module connected to the board.
13. I have purchased eInfochips 410 board along with HDMI module. After flashing prebuilt images when I first power up the board nothing is being displayed
on HDMI screen, but I am able to get access through (adb) USB. So how can I get output on HDMI screen?
By Default Display is routed to LCD, you need to switch display from LCD to HDMI.
To switch from LCD to HDMI use below command:
$ sudofastbootoem select-display-panel adv7533_1080p
To switch from LCD to HDMI use below command:
$ sudofastbootoem select-display-panel adv7533_1080p
14. I have purchased eInfochips 410 board without LCD/HDMI board, How can I verify my board is working or not?
USB/UART debugging is available to access eInfochips 410 control.
15. How to switch from Android to Linux
In order to switch from Android to Linux follow below steps:
- 1 Flash board with Linux bootloaders (Refer Linux User Guide's section 8 Flashing Linux Bootloaders)
- 2 Flash boot image and rootfs image (Refer Linux User Guide's section 9 Installing Linux on eInfochips 410 platform)
16. How can I change boot animation in Android?
In order to change bootanimation, you have to replace bootanimation.zip in /system/media/ with your intended bootanimation.zip and reboot the board.
17. ADB device not detected.
Make sure you have connected the USB cable properly, or may be device is in fastboot mode.
If you are using Windows please update adb driver. Refer “ Environment Setup Guide” section 5.2.2. Please share debug logs with eInfochips support team.
If you are using Windows please update adb driver. Refer “ Environment Setup Guide” section 5.2.2. Please share debug logs with eInfochips support team.
18. Device is locked
Please try below command
$sudo fastboot oem unlock
If problem still persists, please contact to eInfochips support team.
$sudo fastboot oem unlock
If problem still persists, please contact to eInfochips support team.
19. Power consumption of eInfochips 410
| # | Use Case | Current (mA) | Watt (mW) |
| 1 | Booting process | 544 | 2013 |
| 2 | WiFi Enable | 131 | 485 |
| 3 | Bluetooth Enable | 134 | 496 |
| 4 | WiFi + Bluetooth | 135 | 500 |
| 5 | 1080P/720P Video Play | 183 | 677 |
| 6 | Camera | 261 | 966 |
| 7 | Sleep / Standby | 93 | 344 |
| 8 | Idle Mode | 129 | 477 |
| 9 | Capture image | 563 | 2083 |
20. Wifi performance data
| Mode |
5 Meter | 10 Meters | ||||||
| External Antenna |
Chip Antenna | External Antenna |
Chip Antenna | |||||
| Upload Speed (Mb/s) |
Download Speed (Mb/s) |
Upload Speed (Mb/s) |
Download Speed (Mb/s) |
Upload Speed (Mb/s) |
Download Speed (Mb/s) |
Upload Speed (Mb/s) |
Download Speed (Mb/s) |
|
| B-Mode | 5.061 | 5.19 | 4.717 | 5.133 | 4.593 | 5.151 | 4.979 | 5.057 |
| G-Mode | 16.65 | 20.131 | 15.882 | 18.747 | 14.044 | 19.965 | 11.322 | 11.433 |
| N-Mode | 42.868 | 46.504 | 34.596 | 37.289 | 36.204 | 33.964 | 29.709 | 29.5 |
| B-G-N-Mix Mode | 44.998 | 38.704 | 33.351 | 29.379 | 37.433 | 38.218 | 24.718 | 15.817 |
Note :
"Specifications are subject to change without notice. Not all features listed may be supported in software. All brand or product names are trademarks or registered trademarks of their respective owners. Qualcomm Snapdragon, Qualcomm Kryo, Qualcomm Spectra, Qualcomm Adreno, and Qualcomm Hexagon are products of Qualcomm Technologies, Inc."
This website requires cookies to provide all of its features. By using our website, you agree to our use of cookies - Read More - Accept Terms