eInfochips Qualcomm® Snapdragon™ 624 (APQ8053) Lite HDK : EIC-Q624-210 Development Kit

Skip to the beginning of the images gallery

eInfochips 624: EIC-Q624-210

With the recent advancements in embedded applications, the devices are expected to be smaller, multi-functional with high-end video and multiple connectivity options. eInfochips 624 kit is a combination of Qualcomm® Snapdragon™624 based Micro SOM and a carrier board. The kit come with a pre-built Android BSP that can help in early prototyping `and parallel software development. Qualcomm Snapdragon 624 is a mid-range octa-core SoC and supports 802.11ac WiFi and Bluetooth 4.1. The 624 is highly efficient than its predecessor and supports 1080p90 encoding.

$745.00

Specification
Resources

CPU

CPU Name	Qualcomm Snapdragon™ 624 (APQ8053-Lite 1.8GHz)
CPU Type	ARM Cortex-A53 CPU cores
CPU Cores	8
CPU Clock (Max)	1.80 GHz

MEMORY
LPDDR4	3GB
UFS	32GB

MULTIMEDIA
2D/3D Graphics Acceleration	Adreno™ 506 GPU
Video Encode	1080p @ 90fps, 1080p @ 60 fps (H.264, H.265, VP8)
Video Decode	Up to 3840x2160 (4K) @ 30 fps (H.264, H.265) 1080p @ 60 fps (H.264, H.265, VP8)
Camera Interfaces	Dual 14-bit image signal processing (ISP): 3x 4-lane MIPI-CSI Ports (2x Simultaneous support) Support for 16MP and 13 MP Image Sensors

DISPLAY
DSI	2x 4-lane MIPI-DSI eInfochips Display Adapter Card Support (1080p) Full HD (1920 x 1080) 60 fps; 16/18/24 bpp RGB Wi-Fi Display (WFD): 1080p30

NETWORKING
Wi-Fi	802.11a/b/g/n/ac 2.4/5Ghz
Bluetooth	Bluetooth 4.2 (Classic & BLE)

AUDIO
Audio	Built-in Audio Codec Support (PMIC) – On Header Discrete Qualcomm® Audio Codec Support

CONNECTIVITY

1x microSD card

USB

2x USB 3.0 via USB 3.0 Hub

1x Ethernet via USB 3.0 Hub (100/1000Mbps)

USB 3.0 OTG via USB 3.0 Switch (Mutually

exclusive with 2x USB 3.0 and 1x Ethernet)

UART

2x UART

I2C

1x I2C

SPI

1x SPI

Sensors

1x Accelerometer and Gyroscope

1x Magnetometer

1x Ambient Light & Proximity Sensor

1x Temperature Sensor

1x Pressure Sensor

GPS

GPS (GNSS, GLONASS)

U.FL connector on SOM, Chip Antenna on Carrier

Card (SOM to Carrier Card Connection via U.FL Cable)

GPIO

2x GPIO

OS SUPPORT
Android	8.1

MECHANICAL SPECIFICATIONS
Carrier Board Dimensions	120mm x 130mm

ELECTRICAL SPECIFICATIONS
Supply voltage	12V/5A input from 12V DC Power Adapter Optional - Battery Support - 3.7V Li-Po Battery

ENVIRONMENTAL SPECIFICATIONS
Ambient Temperature Range	-30˚C to +85˚C

KIT DETAILS
Kit Contents	1x System on Module based on Snapdragon 624 1x Carrier Board 1x LCD (MIPI-DSI, 1080p) 1x Audio Board (Using Qualcomm WCD9335 Audio Codec) 1x Base Plate 1x Power Adapter 1x Ethernet Cable 1x Micro USB Cable 1x Quick Start Guide

Documentation

eInfochips 624 Technical Datasheet Download

Note :